TriggerTech PCC Drop-In Trigger
Two-stage, Fixed or Adjustable drop-in triggers for your PCC
TriggerTech PCC Drop-In Triggers are built for top competitive shooters to offer the most accurate and dependable trigger on the market. Featuring Zero Creep Technology™, this drop-in trigger has a short, two-stage action, designed to feel like a 1911 trigger, that provides a true zero-creep break, extremely short overtravel, a sub 0.015” tactical reset and offers outstanding reliability, even in the harshest environments. Utilizing CLKR Technology™, the pull weight is quickly and confidently adjusted in 2oz increments from a set screw with the trigger installed. Due to there being truly zero creep, most shooters report the pull weights feeling ~0.5lbs lighter than a friction-based trigger of the same measured pull weight. Changing the pull weight does not affect hammer force so you get dependable primer strikes at every weight. Frictionless Release Technology™, along with hardened 440C stainless steel internal components ensure corrosion resistance and an extended service life. As Zero Creep Technology™ does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot and after thousands of shots than you ever thought possible.
All pull weights and measurements are approximate.
The installation guide is directed to experienced professional gunsmiths who understand the workings of their AR rifle and know how to fully detail strip the lower receiver. If you do not have these skills, we strongly suggest you retain the services of a competent professional gunsmith to install your trigger, and perform all important safety checks.
See our entire selection of high-performance AR Triggers.
|Platform||AR15(AR9) | FX9|
|Type||Drop-In | Two-Stage | Adjustable and Fixed|
|Shoe Type||Curved | Flat|
|Pull Weight (Adaptable)||1st Stage - 0.75lb | 2nd Stage - 2.75 - 5.25 lb|
|Pull Weight (Competitive)||1st Stage - 0.75lb | 2nd Stage - 2.75 lb|
|Pin Size||Mil Spec 0.154"|
|Material||7075 Aluminum | 440C Stainless Internals|
The AR-9 trigger’s hammer design has more mass compared to our AR15 model, which increases inertia. The Center of Percussion is also lower in comparison to AR15, which is specific to the AR-9 platform. This allows maximum energy delivery upon impact with the firing pin, while reducing vibration and wear.
Freedom Ordinance FX-9
The FX-9 trigger is nearly identical to the AR-9 trigger design, except it has lower disconnect engagement to provide the extra clearance required by the FX-9 platform bolt carrier group. This trigger is ideal for PCC’s that have a lower bolt carrier group.