Starline 500 S&W Brass
Sold in 100, 250, 500, and 1000ct quantities.
Starline 500 S&W Brass starts with consistent metallurgy, precise tooling, tight quality control, and 30 plus years of experience. 100% of Starline 500 S&W Brass guaranteed to have flash hole presence and to be of the correct length and diameter. Unlike some competitors, Starline’s brass is vertically drawn, effectively minimizing wall thickness variation.
Our 500 S&W Brass has been tested at elevated pressures suitable for Magnum Heavy Hunting Loads in adequate gun systems. When loading with black powder, annealing of the mouth may be necessary to allow the case to properly seal the chamber due to lower pressures generated by these loads. Our case is produced very strong to withstand high-pressure loads associated with smokeless hunting loads and since the only way to make brass harder is to work the material our only option is to leave them stiffer so the customers can anneal for a specific application. See annealing procedure in Commonly Asked Questions, section #4.
When it comes to selecting the best in 500 S&W Brass, choose Starline for your reloading needs. If you’re needing projectiles, don’t forget to view our selection of pistol bullets. Since most pistol shooters look for a great low-cost bullet, check out our selection of Berry’s Bullets. Also, we carry a large selection of once-fired brass.
Caliber: 500 S&W
OAL: 1.616″ – 1.622″
* This is NOT loaded or primed ammunition *