Starline 41 Magnum Brass
Starline 41 Magnum Brass starts with consistent metallurgy, precise tooling, tight quality control, and 30 plus years of experience. 100% of Starline 41 Magnum brass guaranteed to have flash hole presence and to be of the correct length and diameter. Unlike some competitors, Starline’s brass is vertically drawn, effectively minimizing wall thickness variation.
Starline 41 Magnum brass has been tested at elevated pressures suitable for Magnum Heavy Hunting Loads in adequate gun systems. When loading with black powder, annealing of mouth may be necessary to allow case to properly seal chamber due to lower pressures generated by these loads. Our case is produced very strong to withstand high pressure loads associated with smokeless hunting loads and since the only way to make brass harder is to work the material our only option is to leave them stiffer so the customers can anneal for specific application. See annealing procedure in Commonly Asked Questions, section #4.
When it comes to selecting the best in 41 Magnum brass, choose Starline for your reloading needs. If you’re needing projectiles, don’t forget to view our selection of pistol bullets. ?Since most pistol shooters look for a great low cost bullet, check out our selection of Berry’s Bullets. Also, we carry a large selection of once fired brass.
Caliber: 41 Magnum
Primer: Large, Unprimed
OAL: 1.275″ – 1.285″
MSRP: $100.50 (500ct), $176.00 (1000ct)
*This is NOT loaded or primed ammunition *