Primed Lake City Pull-Down Brass – 7.62×51



Primed Lake City Pull-Down Brass - 7.62x51

Primed, New Manufacture, Pull-Down

Our primed Lake City Pull-Down Brass - 7.62x51 comes directly from the Lake City ammunition plant.  Pull-downs are produced from new manufacture ammunition, which has had the projectile pulled and smokeless powder removed, leaving the crimped-in primer in place.  Prior to reloading, cartridges need a careful inspection, removal of any remaining projectile sealant, and neck sizing may be required.

Lake City 7.62x51 brass is manufactured in the U.S.A, it's thick-walled, tough, and makes a great set of cases for your handloads perfect for the independent DIY reloader.  Under normal conditions, and with proper maintenance of your cartridges, you can expect four to eight reloads per cartridge.  Since 2014, we've sourced brass from the Armed Forces, and are glad to put it back into the hands of shooters across the country.  Orders are bulk packaged in sealed, heavy-duty bags perfect for long-term storage.


  • New Manufacture, Never Fired Lake City 7.62x51 Brass
  • Primer is seated and securely crimped.
  • Factory Annealed Necks

Pull-Down Brass Advisements

***Please read below as this product is NON-REFUNDABLE***

- This is NOT Loaded Ammunition.
- Projectile and Powder NOT included.
- Necks contain evidence of prior loading (sealant, etc.)
- May contain other NATO headstamps.**

This product is made available for knowledgeable reloaders with the experience and tools necessary to do all required case-prep work.  If unfamiliar with pull-downs, please do your research and understand what you are purchasing prior to checkout.

**  We realize some customers are very particular about the headstamps of the brass they receive.  Some even so particular it takes just 1 piece of non-LC headstamp to send them into a rampage.  We go to great efforts to ensure our products are properly advertised, however, be advised your order "may" contain a small amount of other NATO headstamps.  We do not send replacements or issue refunds/credits in these instances.

Are you Scared?

After your first firing, don't toss those cases!  Lake City Brass is excellent quality brass, suitable for another 4-8 uses.  Swaging a case to remove the primer crimp is extremely easy.  For the average reloader using a single stage or turret press, a swage die can be had for about $50.  Our favorite is the CH4D Swage & Priming Die.

Arm or Ally is a stocking dealer for all Faxon Firearms, Ballistic Advantage, HOLOSUN, Toolcraft, Elftmann Tactical, Timney, CMC Triggers, HIPERFIRE and named the #1 Overall E-Commerce Dealer for Aero Precision Products in 2020!  See our growing inventory of AR Parts, and Reloading Components.

Weight 1 oz
Dimensions N/A
Brass Type

New Brass, Once Fired – Military


7.62 X 51mm, 0.308

Component Type


Primer Size

Large Rifle

Scroll to Top