Killer Innovations Velocity V1 Slide for Glock 19 Gen 4 | MDC Gray

Killer Innovations Velocity V1 Slide for Glock 19 Gen 4 | MDC Gray

The Killer Innovations Velocity V1 Slide for Glock 19 Gen 4 is built for compact custom pistols that need aggressive machining, direct-mount optic capability, and durable stainless-steel construction. Its MDC Gray finish gives the slide a distinctive neutral appearance, while the three-window V1 design and front-to-rear gripping features set it apart from conventional factory-style Glock 19 slides.

Killer Innovations machines the Velocity V1 from 17-4 stainless steel, then applies a PVD coating for a hard, wear-resistant exterior. Large window cuts remove material from the slide and expose portions of the barrel underneath, making this configuration especially effective when paired with a contrasting barrel or other custom components.

Slide manipulation is aided by Killer Innovations’ Enhanced Grip Feature, or E.G.F. machining. These cuts are positioned at both the front and rear of the slide and create pronounced walls that provide a positive surface to push against while racking the pistol, checking the chamber, or clearing the action.

The integrated dual optic cut expands red dot compatibility without requiring a conventional intermediary mounting plate. The slide directly supports both Trijicon RMR and Leupold DeltaPoint Pro mounting footprints, allowing a wide selection of compatible pistol optics to be incorporated into a Glock 19 Gen 4 build.

At approximately 8.7 ounces with the optic cover plate and screws installed, the Glock 19 Velocity V1 retains the strength of stainless steel while benefiting from extensive exterior machining. The slide is supplied stripped so the builder can select the barrel, recoil system, sights, and internal upper components best suited to the finished pistol.

Key Features

• Velocity V1 slide for Glock 19 Gen 4
• Precision machined from 17-4 stainless steel
• MDC Gray PVD finish
• Three-window V1 slide design
• Front and rear Enhanced Grip Feature cuts
• Positive gripping surfaces for easier slide manipulation
• Dual red dot optic cut
• Direct Trijicon RMR footprint compatibility
• Direct Leupold DeltaPoint Pro footprint compatibility
• Approximately 8.7-ounce stripped slide weight with cover plate and screws
• Made in Tumwater, Washington, USA

Optic Compatibility

• Trijicon RMR footprint optics
• Leupold DeltaPoint Pro footprint optics
• EOTech EFLX using the supported DeltaPoint Pro mounting pattern
• Select Holosun optics using a compatible RMR footprint
• Trijicon RMR-pattern mounting threads: 6-32
• Leupold DeltaPoint Pro / EOTech EFLX mounting threads: M4 x 0.7
• Confirm optic dimensions and proper mounting-screw length before installation

Included

• Killer Innovations Velocity V1 stripped slide
• Black optic cover plate
• Two blue cover plate screws
• Black RMR shim

Compatibility

• Glock 19 Gen 4 pistols
• Compatible Glock 19 Gen 4 frame and upper-component configurations
• Standard Glock-pattern iron sights
• Compatible red dots using supported RMR or DeltaPoint Pro mounting patterns
• Not compatible with the Radian Ramjet / Afterburner system
• Not compatible with Glock Gen 6

Important Build Information

• This product is a stripped slide
• Barrel is not included
• Recoil spring assembly is not included
• Iron sights are not included
• Internal upper parts are not included
• Channel liner is not included
• Killer Innovations recommends OEM upper parts when completing the slide
• Confirm optic footprint and mounting hardware before final installation