Ballistic Advantage Threaded Barrel for SIG P365XL / XMacro | Copper | Non-Fluted | No LCI

Ballistic Advantage Threaded Barrel for SIG P365XL / XMacro | Copper | Non-Fluted | No LCI

The Ballistic Advantage Threaded Barrel for SIG P365XL and P365 XMacro adds 1/2×28 muzzle threads to compatible long-slide P365 configurations while retaining a smooth, non-fluted exterior. A Copper PVD finish gives the barrel a distinctive custom appearance and adds durable protection against corrosion, environmental exposure, and routine cycling wear.

This model is manufactured without a loaded chamber indicator cut. The No LCI configuration is intended for compatible SIG P365XL, P365 XMacro, and P365 XMacro TACOPS slide assemblies designed to use a non-LCI barrel.

Its 4.2-inch threaded overall length extends beyond the slide to provide clearance for compatible 9mm suppressors, compensators, and other muzzle devices. The common 1/2×28 thread pattern offers broad accessory compatibility, while the clean exterior provides a more understated alternative to Ballistic Advantage’s Spiral- and Bomber-fluted barrels.

Ballistic Advantage machines this Premium Series pistol barrel from hardened 416R stainless steel for strength, toughness, and corrosion resistance. The Copper Physical Vapor Deposition coating adds a hard, durable exterior surface while allowing the barrel to stand out through compatible slide windows and openings.

Each bore is honed, lapped, and tumbled to remove manufacturing imperfections and create a smooth internal finish. The chamber meets SAAMI specifications, and bore deviation is held to less than .0001 inch to support consistent lockup, reliable cycling, and repeatable accuracy without a manufacturer-prescribed break-in period.

Features

• Designed for compatible SIG P365XL and P365 XMacro configurations
• No loaded chamber indicator cut
• For use with compatible non-LCI slide assemblies
• Chambered in 9mm Luger
• Premium Series threaded pistol barrel
• Hardened 416R stainless steel construction
• Copper Physical Vapor Deposition finish
• Smooth, non-fluted exterior profile
• 4.2-inch threaded overall length
• 1/2×28 muzzle threads
• 1:10 right-hand twist rate
• Chamber manufactured to SAAMI specifications
• Honed, lapped, and tumbled bore
• Held to less than .0001-inch bore deviation
• No manufacturer-prescribed break-in period

Compatibility

• SIG P365XL with a compatible non-LCI slide assembly
• SIG P365 XMacro with a compatible non-LCI slide assembly
• SIG P365 XMacro TACOPS with a compatible non-LCI slide assembly
• Compatible aftermarket slides designed around the P365XL or XMacro barrel configuration
• Compatible 9mm suppressors, compensators, and muzzle devices using 1/2×28 threads
• Not intended for standard-length P365 or P365X slides
• Not intended for slide assemblies requiring an LCI barrel

Important Fitment Information

• This barrel does not include a loaded chamber indicator cut
• Confirm that the slide and related components support a No LCI barrel
• Verify that the slide is designed for a 4.2-inch threaded P365XL or XMacro barrel
• Confirm suppressor, compensator, and muzzle-device compatibility before use
• Aftermarket slide and component tolerances may affect fitment and performance
• Confirm proper barrel lockup and safe operation before live fire